NEW IX-EN-4093 | Technical Information NEW IX-EN-4093 Versatile X-ray inspection with the perfect balance of great sensitivity and low operating costs X-ray detection that boasts optimal sensitivity in a cost-effective system. Designed with enhanced inspection technology, this system gives an unrivalled return on investment. Dimensions in mm 700 705 430 540 870 865 1960 1745 325 900 ±50 720 800 Specifications Tunnel aperture Construction Width Height Material IP Rate Machine dimensions Machine weight Dimensions Conveyor Belt height Speed Loaded weight Product length Minimum spacing between products Power supply Tube voltage X-ray Tube current Output Line sensor X-ray protection X-ray emissions Working environment Temperature Humidity IX-EN-4093 400mm 150mm SUS304 (Polished surface – Bead blast option) Conveyor chamber: IP66 / Enclosure: IP54 (IP65, option) 800mm(L)x870mm(W)x1745mm(H) (*1) (Floor to Signal Tower: 1960mm) 290kg 800mm(L) x 430mm(W) (1800mm optional (L)) 900mm +/- 50mm (*2) 10-60m/min 5kg (higher weight is optional) 20~450mm (optional 1000mm) (*3) 30mm (*3) Single phase: AC200-240V 50/60Hz 500W (*4) 30/35/40/45/50/55/60/65/70/75kV 1-3mA Max: 150W 0.4mm Protective curtains (*5) Machine meets local regulations 0-33°C (*6) 30-85%RH Belt Surface 279 400 Inspection area The figures show the permissible inspection range. Portions of the product which are not within the shaded area are not irradiated. 150 Product Size (mm) Height (*7) Width 0 400 10 391 20 383 30 375 40 367 50 359 60 351 70 343 80 335 90 327 100 319 110 311 120 303 130 295 140 287 150 279 Design and specifications are subject to change without notice. (*1) This dimension shall be applied in case of 900mm belt height. (*2) Other heights optional. (*3) This dimension should be followed under Snap-Mode only. In case of Bulk-Mode, not applied. (*4) 500W is applied in case of no specific ancillary. (*5) The material of protection curtain is tungsten, and curtain is detachable. (*6) If the room is hotter than 33°C, the air conditioner shall be arranged as a chargeable option. In this case, the maximum temperature is 40°C. (*7) The inspection width against the height is approximate value. All information supplied within is correct at time of publication. Ishida Europe pursues a policy of continual improvement due to technical development. We therefore reserve the right to deviate from information, descriptions, and specifications in this publication without notice. Ishida Europe shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Download PDF file
Cookie policy