NEW IX-GN-4044 | Technical Information NEW IX-GN-4044 Advanced X-ray inspection with the perfect balance of high performance detection sensitivity and low operating costs Advanced X-ray detection that strikes the balance between optimal sensitivity and economic operation. Suitable for a wide range of products, this X-ray inspection system can be adapted to virtually any application. Dimensions in mm 700 705 430 540 905 865 1960 1745 325 900 ±50 Specifications Tunnel aperture Construction Width Height Material IP Rate Machine dimensions Machine weight Dimensions Conveyor Belt height Speed Loaded weight Product length Minimum spacing between products Power supply Tube voltage X-ray Tube current Output Line sensor X-ray protection X-ray emissions Working environment Temperature Humidity IX-GN-4044 400mm 150mm SUS304 (Polished surface – Bead blast option) Conveyor chamber: IP66 / Enclosure: IP65 800mm(L)x905mm(W)x1745mm(H) (*1) (Floor to Signal Tower: 1960mm) 315kg 800mm(L) x 430mm(W) (1800mm optional (L)) 900mm +/- 50mm (*2) 10-60m/min 5kg (higher weight is optional) 20~450mm (optional 1000mm) (*3) 30mm (*3) Single phase: AC200-240V 50/60Hz 1150W (*4) 25/30/35/40/45/50/55/60/65/70/75kV 1-8mA Max: 300W 0.3mm Protective curtains (*5) Machine meets local regulations Maximum operating temperature 40°C 30-85%RH 720 800 Belt Surface 277 400 Inspection area The figures show the permissible inspection range. Portions of the product which are not within the shaded area are not irradiated. 150 Product Size (mm) Height (*6) Width 0 400 10 391 20 383 30 375 40 367 50 359 60 351 70 342 80 334 90 326 100 318 110 310 120 302 130 294 140 285 150 277 Design and specifications are subject to change without notice. (*1) This dimension shall be applied in case of 900mm belt height. (*2) Other heights optional. (*3) This dimension should be followed under Snap-Mode only. In case of Bulk-Mode, not applied. (*4) 500W is applied in case of no specific ancillary. (*5) The material of protection curtain is tungsten, and curtain is detachable. (*6) The inspection width against the height is approximate value. All information supplied within is correct at time of publication. Ishida Europe pursues a policy of continual improvement due to technical development. We therefore reserve the right to deviate from information, descriptions, and specifications in this publication without notice. Ishida Europe shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Download PDF file
Cookie policy